- This topic has 31 replies, 12 voices, and was last updated 5 hours, 21 minutes ago by
.
-
Posts
-
-
I’m getting fed up with this lately. Same site, same host, same setup, and then one plugin update just decides to break something completely unrelated. Had a caching plugin start throwing weird PHP notices, then the mobile menu stopped working after I cleared cache. Fun times. What’s annoying is people always jump straight to “it’s your theme” or “just disable plugins one by one” like that’s some magic answer. Half the time it’s not even the obvious stuff. I’ve seen security plugins mess with AJAX, lazyload break image indexing, even a simple backup plugin cause cron jobs to go sideways. Anyone else noticing more of this lately, or am I just hitting bad luck?
-
Personally, yeah, I’ve been seeing more of it too, and half the time it’s some dumb edge case that only shows up after an update. Had one site where a “minor” cache plugin update was fine until it started fighting with a menu script on mobile only. Desktop looked normal, of course, because why would it ever be simple.
-
Yeah, I’m seeing it too. Usually it’s some stupid combo of “works fine in isolation” until you hit one other plugin and then the whole thing gets weird. The worst ones for me lately have been cache + minify + anything that touches AJAX. Looks normal, then one update later the mobile nav dies or some random notice starts spamming logs. Fun stuff.
-
-
Kind of feels like honestly, yeah, been seeing it too. Half the time it’s some ugly little interaction nobody spots until after the update. The annoying part is it’ll look fine for a day, then suddenly you’re chasing notices, broken menus, or some AJAX nonsense. If it’s getting noisy, I’d just pin the exact plugin versions and stop updating everything at once for a bit. That’s been my experience anyway.
-
In my opinion, yeah, same story here. It’s almost never the “big obvious” plugin either, it’s some dumb interaction between two things that both looked fine in testing. I’ve had cache plugins break admin AJAX, security stuff mess with heartbeat, and one lazyload update that quietly wrecked image handling in logs before anyone noticed. The annoying part is it can look stable until cache gets purged or cron kicks in, then everything starts acting cursed. “Disable plugins one by one” is fine if you’ve got all day and enjoy babysitting a broken site, I guess. Usually I just check the logs first and look at what changed right before the noise started.
-
Yeah, I’ve seen it more than I’d like. It’s usually not “random” random either — some plugin update flips a hook, changes output timing, or starts doing some dumb extra request and then everything downstream gets weird. Cache plugins are especially good at making a mess look unrelated. The “disable them one by one” crowd drives me nuts too. Sure, if you’ve got a tiny site and all afternoon, great. On a bigger setup it’s just a slow way to confirm what the logs already told you 20 minutes ago. I’ve had security plugins break AJAX, one backup plugin trash cron, and lazyload updates make image handling look fine in the browser while the crawl stats quietly went…
-
Honestly, i mean, yeah, way more than I’d like lately. It’s never the plugin everyone blames first either. Half the time it’s some stupid little interaction after an update and you don’t even notice until cache gets cleared or cron runs and everything starts acting haunted. The “just disable them one by one” advice always gets old too. Like sure, if I had nothing else to do with my life maybe.
-
-
To be fair, Yeah, it’s been happening enough that I don’t even call it “random” anymore. Half the time it’s some plugin update quietly changing behavior and then you’re stuck chasing ghosts for an hour. The annoying part is it’ll look totally fine until cache gets nuked or cron kicks in, then suddenly everything’s on fire. Been there way too many times.
-
From what I see, Yeah, it’s not just you. I’ve had more “why is this breaking now?” moments in the last year than I care to admit. The annoying part is it’s usually some dumb edge case between two plugins nobody thought would ever touch the same hook. Then after an update it starts spewing notices or killing AJAX and you’re the one…
-
Seriously, personally, Usually, from my experience, yeah, and the “just disable plugins one by one” crowd can shove it, honestly. Half the time the breakage shows up two layers away from the thing you updated, which is what makes it such a pain. I’ve had one stupid update nuke AJAX on a site and it only showed up after cache purge too. So yeah, not just bad luck. This stuff feels way worse lately.
-
In my opinion, yeah, it’s not just you. I’ve seen way more of this lately too, and half the time the “fix” is just masking the actual conflict until the next cache purge or cron run blows it up again. And yeah, Mason’s favorite advice is still garbage when the issue is some dumb hook collision three plugins deep.
-
Personally, yeah, I’m seeing it more too, and it’s usually some stupid combo nobody notices until after the update. The worst part is when it “works” right up until cache gets cleared or cron kicks in, then suddenly everything’s on fire again. That’s when the generic disable-everything advice gets real old real fast. Just my experience.
-
-
I mean, yeah, same here. It’s been annoyingly random — not even the “big” plugins, either, just some update in the background and suddenly something dumb breaks. And yeah, the disable-one-by-one crowd loves pretending that’s always a clean fix. On a real site it usually just means u spend an hour proving what you already knew: something’s conflicting, but the actual trigger is buried in a hook or a cache edge case. Yeah,
-
To be fair, honestly, Yeah, it’s not just you. Seems like every other update wants to “help” by breaking something totally unrelated. The annoying part is half the time it isn’t even a clean plugin-to-plugin conflict, it’s some weird timing issue with cache, cron, AJAX, whatever. So the usual “just disable them all” answer is basically just a way of saying “good luck, mate.” If it’s happening after updates, I’d be looking at the plugins that hook into the same stuff first, not the obvious big names. That’s where the dumb little breakage usually hides.
-
-
Honestly, Yeah, exactly. The “one by one” thing is such a lazy answer once the site’s actually doing real traffic and cache is involved. Half the time the breakage only shows up after the page’s been sitting warm for a bit, or when some cron/AJAX nonsense lines up just wrong. Then everyone acts like you should’ve…
-
Yeah, I’ve seen it more than I used to. The annoying part is it’s often not even a “conflict” in the clean sense, it’s just two plugins both hooking the same AJAX/cache/cron path and then one update changes timing a bit and the whole thing goes sideways. The “disable everything” advice is fine for a local test, but in production it’s usually useless noise.
-
To be fair, yeah, more than I used to, honestly. And the “disable one by one” thing is fine in theory, but in practice it’s usually a waste of time unless the issue is super obvious. Half these breakages only show up after cache, cron, AJAX, or some weird timing issue anyway. I’ve had a backup plugin knock out scheduled tasks before and everyone swore it “couldn’t be that.” So yeah, not just you. Personally,
-
In my opinion, Yep, seen plenty of it. And honestly the “it’s your theme” crowd usually hasn’t looked past the first obvious thing. The annoying part is when it’s some dumb interaction between cache + JS defer + a plugin update and it only blows up after a purge or when a cron runs. Fun stuff. I’ve had a “harmless” SEO plugin start messing with admin-ajax before, so yeah, not exactly rare.
-
Interesting take. Well, yeah, definitely been seeing more of it too. And “just disable plugins one by one” is such lazy advice, honestly. Half the time the thing breaking isn’t even the plugin you’d suspect — it’s some stupid interaction after an update, or cache, or cron, or whatever other mess is sitting under the hood. At least lately. Obviously.
-
In my opinion, Usually, from what I’ve seen, yeah, it’s not just you. I’ve been seeing more of that stupid “works fine until you touch cache / cron / AJAX” nonsense too. And yeah, the “disable one by one” crowd acts like that’s some brilliant insight. Sometimes it’s useful, sure, but half the time the breakage only shows up after an update or a cache purge, so you’re basically chasing ghosts.
-
From what I’ve seen, yeah, I’m seeing it too, and it’s getting old fast. The annoying part is it’s never the “one obvious bad plugin” half the time. It’s some weird chain reaction after an update, then everybody acts like you’re incompetent because you didn’t magically guess the exact combo. I had a stupid little image plugin nuke a menu script last week. No clue why. Same setup, same host, same everything, then boom — broken after a routine update. So yeah, not just bad luck, I don’t think.
-
-
Technically, yeah, I’m seeing it too. Not every week, but enough that it’s hard to pretend it’s all “bad setup” nonsense. The annoying part is the timing — stuff looks fine until a cache clear, a plugin update, or some AJAX path gets touched, then suddenly you’re staring at a broken menu or random notices in logs. And half the time the plugin itself isn’t even the thing that *looks* broken, it’s just the thing that exposed the mess underneath. I’ve had security plugins interfere with REST/AJAX before, and one lazyload plugin absolutely trashed image handling on a site that was otherwise boringly stable. Backup plugins messing with cron is another classic. So yeah, not crazy, just the usual garbage 🙄 The “disable one by one” advice isn’t wrong, it’s just lazy when people throw it out like it explains anything.
-
-
Yeah, definitely seeing more of it than I used to. What annoys me is the “must be your theme” crowd. Sometimes it is, sure, but a lot of these newer plugin updates seem to assume everything else on the site is perfectly behaved and that’s just not real life. One bad hook or a sloppy AJAX change and suddenly you’re chasing down some nonsense in a totally different part of the site. I’ve had cache + security + lazyload combinations do weird stuff that never showed up in staging either, which is always fun.
-
Yeah, I’ve seen it enough to stop shrugging it off as “just your setup.” The annoying part is it’s usually some ugly combo issue, not one clean culprit. Cache + security + lazyload is a classic mess, and updates seem to make those edge cases show up more often than they used to. Staging not catching it either is the part that really gets me — one tiny difference and boom, weird behavior. I’d still say it’s worth checking the boring stuff first, but yeah, the “disable everything one by one” response gets old fast. Sometimes that’s all people know how to say.
-
In real projects, in my opinion, in practice, yeah, I’m seeing it more too. Not every time, but enough that it’s getting annoying. The “just disable one by one” crowd acts like that’s some deep insight when half the time the conflict only shows up after a specific update combo. And of course it never happens on the clean test site, because why would it.
-
Honestly, Yeah, it’s not just bad luck. I’ve had more “random” plugin breakage in the last year than I care to admit, and half the time it’s some dumb interaction nobody tested properly. The update itself isn’t always the problem either — sometimes it’s just enough to expose some ugly timing issue or a bad hook that was already sitting there. The “disable everything one by one” advice is fine if you’ve got all day and a tiny site. In real life it’s usually logs, rollback, and checking what changed in the last release.
-
- You must be logged in to reply to this topic.